Theoretical Simulation and Optimization on Material Parameters of Thin Film Bulk Acoustic Resonator

الملخص EN

The resonance frequency, fs, and the effective electromechanical coupling factor, keff2, of thin film bulk acoustic resonators (FBARs) are derived by transfer matrix method.

The effects of thickness and density of electrode on fs and keff2 with different piezoelectric layers are investigated by numerical calculation method.

The results show that thickness and density of electrode affect fs obviously, especially in large thickness and density area.

Moreover, the effects of thickness, density, and acoustic velocity of electrode on keff2 of FBAR were also studied.

The results show that there is a maximum keff2 corresponding to the composition of thickness and density of electrode which is about 20% over the original electromechanical factor of piezoelectric film.

keff2 is in the direct proportion to the density ρe and ve of electrode, respectively.

The electrode thickness affects keff2 small with high ve; moreover, when ve is high enough, then keff2 has almost nothing to do with de.

keff2 always rises with electrode thickness first and then descends with its rising, and the thickness corresponding to the maximum keff2 is different with different electrode, but it always locates in the special area.

All above results indicate that the thickness, density, and acoustic velocity of electrode are so important that these results can be applied to design FBAR.