Effect of cold work on structure and properties of aisi 304 stainless steel
المؤلفون المشاركون
al-Halawani, F.
Baradia, C.
Milad, M.
Zreiba, N.
المصدر
العدد
المجلد 13، العدد 22 (31 ديسمبر/كانون الأول 2007)، ص ص. 69-86، 18ص.
الناشر
تاريخ النشر
2007-12-31
دولة النشر
ليبيا
عدد الصفحات
18
التخصصات الرئيسية
الموضوعات
الملخص EN
The influence of various degrees of plastic deformation by cold illing at ambient temperature on the tensile properties of AISI 304 ainless steel was investigated.
Microstructural, ferromagnetic and irdness studies were also conducted.
The material was evaluated up i 50 pet.
reduction in thickness.
The results indicate that the irmation of strain - induced martensite evidently led to a significant rengthening of the steel.
The tensile strength, the yield strength and le hardness were shown to be increased with increasing cold :duction percentage (CR%) up to 45 pet.
It was found that, the ratio f tensile strength in Mpa to Vickers hardness is approximately three >r all percentages of cold reduction.
Moreover, the percentage icrease of tensile strength from 0% CR to 50% CR is same as that f hardness.
The cold rolling of 304ss between 45% - 50% CR has negligible ifect on tensile and yield strengths of the investigated steel.
A slight 'feet on the hardness was noticed after 45 pet.
Therefore, it may be included that 304ss has undergone a state of full - hard at CR>45%.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Milad, M.& Zreiba, N.& Baradia, C.& al-Halawani, F.. 2007. Effect of cold work on structure and properties of aisi 304 stainless steel. al-Buḥūth al-Ṣināʻīyah،Vol. 13, no. 22, pp.69-86.
https://search.emarefa.net/detail/BIM-111124
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
al-Halawani, F.…[et al.]. Effect of cold work on structure and properties of aisi 304 stainless steel. al-Buḥūth al-Ṣināʻīyah Vol. 13, no. 22 (Dec. 2007), pp.69-86.
https://search.emarefa.net/detail/BIM-111124
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Milad, M.& Zreiba, N.& Baradia, C.& al-Halawani, F.. Effect of cold work on structure and properties of aisi 304 stainless steel. al-Buḥūth al-Ṣināʻīyah. 2007. Vol. 13, no. 22, pp.69-86.
https://search.emarefa.net/detail/BIM-111124
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 85
رقم السجل
BIM-111124
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر