Improved rubber composite for engine mounting by addition novolac
المؤلفون المشاركون
Dya, Balkes M.
Ahmad, Jalil Karim
A-Maamory, Muhammad H. D.
المصدر
العدد
المجلد 13، العدد 1 (30 يونيو/حزيران 2009)، ص ص. 79-88، 10ص.
الناشر
جامعة البصرة كلية العلوم الجمعية العراقية للبوليمرات
تاريخ النشر
2009-06-30
دولة النشر
العراق
عدد الصفحات
10
التخصصات الرئيسية
الموضوعات
الملخص AR
هذا البحث يتعلق بتحضير و دراسة مواد المطاط المترائية المستخدم في بعض أجزاء السيارات.
حضرت النماذج من المواد الأصلية المجهزة من شركة اوساكا لدراسة خواصها الميكانيكية، و لغرض المقارنة مع النماذج المحضرة دعمت بواسطة راتنج النوفولاك لتدعيم مطاط النتريل البيوتادين و تراوحت نسب الإضافة من النوفولاك (0-48 %) بينما كانت نسبة المطاط (50-90 %).
الملخص EN
This research deals with preparing and studying rubber composite materials used in automobile’s part which is’ called engine mounting.
In this work samples are prepared from original shock absorbers supplied by Osaka Company to study its mechanical properties as shown in table (1).
For comparison with the original samples, recipe N0.
1was prepared and then developed with reinforcement by novolac.
The mechanical properties compared with original properties.
Reinforcement technique-with copolymer matrix Elastomer (Nitrile butadiene rubber), and thermosetting resin (novolac) as follows : 1) Nitrile butadiene rubber (NBR) is added with 50-98 % as shock and vibration absorber for the new composite material.
2) Addition of novolac resin (0-48%) it gives a good mechanical and thermal properties which are the principal reason for its uses for the new composite material (engine mounting).
At 8 % elastic modulus, flexibility, deformation and impact are 2.19MPa, 13678 cycle, 2.4 mm, 63 % respectively
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Ahmad, Jalil Karim& Dya, Balkes M.& A-Maamory, Muhammad H. D.. 2009. Improved rubber composite for engine mounting by addition novolac. Iraqi Journal of Polymers،Vol. 13, no. 1, pp.79-88.
https://search.emarefa.net/detail/BIM-112940
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Ahmad, Jalil Karim…[et al.]. Improved rubber composite for engine mounting by addition novolac. Iraqi Journal of Polymers Vol. 13, no. 1 (2009), pp.79-88.
https://search.emarefa.net/detail/BIM-112940
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Ahmad, Jalil Karim& Dya, Balkes M.& A-Maamory, Muhammad H. D.. Improved rubber composite for engine mounting by addition novolac. Iraqi Journal of Polymers. 2009. Vol. 13, no. 1, pp.79-88.
https://search.emarefa.net/detail/BIM-112940
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references : p. 86-88
رقم السجل
BIM-112940
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر