Mechanical properties of maleic anhydride grafted onto low density polyethylene polyethylene wax, polypropylene and polystyrene blends

المؤلفون المشاركون

Tahsin, Zaki A.
Adam, Georgius A.

المصدر

Iraqi Journal of Polymers

العدد

المجلد 12، العدد 4 (31 ديسمبر/كانون الأول 2008)، ص ص. 27-46، 20ص.

الناشر

جامعة البصرة كلية العلوم الجمعية العراقية للبوليمرات

تاريخ النشر

2008-12-31

دولة النشر

العراق

عدد الصفحات

20

التخصصات الرئيسية

الكيمياء

الملخص AR

حضرت في هذه الدراسة ثلاث أنواع من الخلائط البوليمرية مع البولي اثيلين الواطئ الكثافة بطريقة مزج المنصهر.

درست الخواص الميكانيكية لخلائط البولي اثيلين الواطئ الكثافة مع نسب مختلفة (5 - 20%) من شمع البولي اثيلين و أضيف لكل خلطة 10% من حامض الماليك اللامائي باستخدام t-Butyl peroxy(2-ethyl hexanoate) (C67) كمحفز لتفاعل التطعيم.

أظهرت النتائج انخفاض في قوة الشد عند الوهن و قوة الشد عند القطع و الاستطالة عند القطع و معامل يونك (المرونة) و الصلادة بينما لوحظ زيادة مقاومة الصدم للنماذج و زيادة معامل السيولة مع زيادة نسبة شمع البولي اثيلين في الخلائط . استبدل شمع البولي اثيلين في الخلائط السابقة بالبولي ستايرين و البولي بروبيلين حيث مزجت نسب منها (10 - 50%) مع البولي اثيلين الواطئ الكثافة و أضيف لكل خلطة 10% من حامض الماليك اللامائي باستخدام ل Di-tert-Butyl Peroxide(C2) كمحفز لتفاعل التطعيم. أظهرت نتائج الخواص الميكانيكية للخلائط مع البولي ستايرين انخفاضا في قوة الشد عند الوهن و قوة الشد عند القطع و مقاومة الصدم و الاستطالة عند القطع و زيادة في الصلادة و معامل السيولة و لوحظ زيادة معامل يونك (المرونة) لنسب 10 و 20% فقط مع زيادة نسبة البولي ستايرين في الخلائط.

أما الخلائط مع البولي بروبيلين بزيادة نسبة البولي بروبيلين في الخلائط ازدادت قوة الشد عند الوهن و قوة الشد عند القطع و معامل السيولة و معامل يونك (المرونة) بينما انخفضت كل من الاستطالة عند القطع و مقاومة الصدم.

الملخص EN

In this study preparation three types of polymers blends with low density polyethylene LDPE in the melt .

Mechanical properties for all blends which containing 5-20% ratio of polyethylene wax and grafted with maleic anhydride(MAH) and t-Butyl peroxy(2-ethyl hexanoate) (C67) as a catalyst had been studied, the study showed a decrease in the tensile strength at yield point, tensile strength at break, elongation at break, hardness with high resistance to impact strength and increase the melt flow index with increasing polyethylene wax.

polypropylene and polystyrene had been used in place of polyethylene wax with LDPE mechanical properties of these blends had been studied by the addition of MAH and Di-tert-Butyl Peroxide(C2) as a catalyst, and the result of samples with polystyrene (10-50%) showed a decrease tensile strength at yield point, tensile strength at break, impact strength and elongation at break, increasing in the hardness and melt flow index.the result of blends with polypropylene(10-50%) showed increasing tensile strength at yield point, tensile strength at break, decreasing in elongation at break and impact strength, the result also showed increasing in melt flow index with increase in polypropylene ratio.

نمط استشهاد جمعية علماء النفس الأمريكية (APA)

Tahsin, Zaki A.& Adam, Georgius A.. 2008. Mechanical properties of maleic anhydride grafted onto low density polyethylene polyethylene wax, polypropylene and polystyrene blends. Iraqi Journal of Polymers،Vol. 12, no. 4, pp.27-46.
https://search.emarefa.net/detail/BIM-113220

نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)

Tahsin, Zaki A.& Adam, Georgius A.. Mechanical properties of maleic anhydride grafted onto low density polyethylene polyethylene wax, polypropylene and polystyrene blends. Iraqi Journal of Polymers Vol. 12, no. 4 (2008), pp.27-46.
https://search.emarefa.net/detail/BIM-113220

نمط استشهاد الجمعية الطبية الأمريكية (AMA)

Tahsin, Zaki A.& Adam, Georgius A.. Mechanical properties of maleic anhydride grafted onto low density polyethylene polyethylene wax, polypropylene and polystyrene blends. Iraqi Journal of Polymers. 2008. Vol. 12, no. 4, pp.27-46.
https://search.emarefa.net/detail/BIM-113220

نوع البيانات

مقالات

لغة النص

الإنجليزية

الملاحظات

Includes bibliographical references : p. 45-46

رقم السجل

BIM-113220