Design and analysis of microstrip antenna using metasurface for wireless communication applications
المؤلفون المشاركون
المصدر
Journal of Engineering and Sustainable Development
العدد
المجلد 25، العدد (s) (31 ديسمبر/كانون الأول 2021)، ص ص. 167-173، 7ص.
الناشر
الجامعة المستنصرية كلية الهندسة
تاريخ النشر
2021-12-31
دولة النشر
العراق
عدد الصفحات
7
التخصصات الرئيسية
الموضوعات
الملخص EN
In this article, the proposed microstrip patch antenna consisting of a ground plane, patch, and 1.6 mm thickness dielectric made from FR-4 material with dimensions (28 x 28) mm2, operated at 3 GHz, using the metasurface technology to enhance the gain of this antenna.
The metasurface is based on a reconfigurable low-frequency antenna that is commonly used in wireless and satellite communications.
The proposed antenna has been tested in two ways First, the surface unit cells (4×4) are placed at ground level by applying a combination of two L-shaped with a C-shaped center.
Second, the surface unit cells are placed on the patch, and the gain was enhanced in each case.
The designed superstructure of the metasurface has the property of an epsilon negative surface (ENG).
The inclusion of the metasurface on the ground plane of the microstrip antenna improved the gain from 6.5 dB to 11.824 dB at 3 GHz, and when the metasurface was placed on the patch, the gain was improved to 8.5269 dB.
Antenna parameters such as VSWR, gain, group delay, and input reflection coefficient were In this article, the proposed microstrip patch antenna consisting of a ground plane, patch, and 1.6 mm thickness dielectric made from FR-4 material with dimensions (28 x 28) mm2, operated at 3 GHz, using the metasurface technology to enhance the gain of this antenna.
The metasurface is based on a reconfigurable low-frequency antenna that is commonly used in wireless and satellite communications.
The proposed antenna has been tested in two ways First, the surface unit cells (4×4) are placed at ground level by applying a combination of two L-shaped with a C-shaped center.
Second, the surface unit cells are placed on the patch, and the gain was enhanced in each case.
The designed superstructure of the metasurface has the property of an epsilon negative surface (ENG).
The inclusion of the metasurface on the ground plane of the microstrip antenna improved the gain from 6.5 dB to 11.824 dB at 3 GHz, and when the metasurface was placed on the patch, the gain was improved to 8.5269 dB.
Antenna parameters such as VSWR, gain, group delay, and input reflection coefficient were studied.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Salih, Rasha M.& Jasim, Ali K.. 2021. Design and analysis of microstrip antenna using metasurface for wireless communication applications. Journal of Engineering and Sustainable Development،Vol. 25, no. (s), pp.167-173.
https://search.emarefa.net/detail/BIM-1273098
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Salih, Rasha M.& Jasim, Ali K.. Design and analysis of microstrip antenna using metasurface for wireless communication applications. Journal of Engineering and Sustainable Development Vol. 25, Special issue (2021), pp.167-173.
https://search.emarefa.net/detail/BIM-1273098
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Salih, Rasha M.& Jasim, Ali K.. Design and analysis of microstrip antenna using metasurface for wireless communication applications. Journal of Engineering and Sustainable Development. 2021. Vol. 25, no. (s), pp.167-173.
https://search.emarefa.net/detail/BIM-1273098
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
-
رقم السجل
BIM-1273098
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر