Natural convection in equilateral triangular enclosure for three situations with heating element applied at different positions on the inclined side wall
العناوين الأخرى
الحمل الحر في حيز مثلث متساوي الأضلاع لثلاث أوضاع بوجود شريحة حرارية مسلطة على مواضع مختلفة من ضلعه المائل
المؤلفون المشاركون
al-Hattab, Tahsin Ali Husayn
al-Saigh, Ali Safa Nuri
al-Innawi, Faruq Hasan Ali
المصدر
The Iraqi Journal for Mechanical and Materials Engineering
العدد
المجلد 11، العدد 4 (31 ديسمبر/كانون الأول 2011)، ص ص. 619-636، 18ص.
الناشر
تاريخ النشر
2011-12-31
دولة النشر
العراق
عدد الصفحات
18
التخصصات الرئيسية
الموضوعات
الملخص AR
في هذه الدراسة، أجري التحليل العددي لانتقال الحرارة الطباقي و جريان المائع بوجود شريحة حرارية مسلطة على مواضع مختلفة من الضلع الجانبي المائل لحيز مثلث متساوي الأضلاع.
الحيز مليء بالهواء كمائع تشغيل برقم برانتل 0.71 =.
كانت جدران الحيز معزولة ما عدا موقع الشريحة حيث يسلط الفيض الحراري.
إن قيمة الفيض الحراري المسلط كانت 10، 30، 70 و 100 واط و المناظرة لرقم رالي 105، 106، 107 و 108 على التوالي.
إن طول الشريحة الحرارية المسلطة تساوي 10 % من طول ضلع الحيز المثلث حيث أن طول كل ضلع يساوي 10 سم.
لحل المعادلات الحاكمة تم استخدام برنامج جاهز (ANSYS 5.4) و الذي يعتمد طريقة الشرائح المحددة و يستند إلى طريقة TDMA.
درست ثلاث أوضاع مختلفة للحيز المثلث (العادي، الجانبي و المعكوس) مع تغيير مواضع الشريحة الحرارية على جدار الحيز لإيجاد أعلى قيمة لدالة الجريان.
أظهرت النتائج أن أعلى قيمة لدالة الجريان و أعلى معدل لانتقال الحرارة يحدث عندما يكون الحيز المثلث في الوضع العادي و الشريحة الحرارية في الموقع الثاني (Po.2) و هو الموقع الذي يقع على طول الضلع المائل للمثلث و يتحدد بالمسافة التي تتراوح بين 0.2L إلى 0.3L من حافة الحيز المثلث.
الملخص EN
Laminar natural convection heat transfer and fluid flow due to heating element inserted at different positions over the inclined side wall of equilateral triangle enclosure has been analyzed numerically in this study.
The enclosure has filled with air as a working fluid with Pr=0.71.
The walls of the enclosure are insulated except an element on one side where the heat flux are applied.
The value of heat flux ( q" ) are 10, 30, 70 and 100 Watt with corresponding Rayleigh number of 105, 106, 107, 108 respectively.
The length of the heating element was taken as 10% of the triangular enclosure side wall length where the length of the wall equals to 10 cm.
The governing mass, momentum and energy equations are applied to the enclosure and solved by finite element using commercial code (ANSYS 5.4) based on TDMA method.
Three different situations (normal, side and inverse) of the triangular enclosure with different positions of heating element are examined in this study to obtain the maximum stream function.
The results show that the maximum value of stream function and high rate of heat transfer occur for normal situation of the enclosure and when the heating element is applied at position2 (Po.2 is a distance over the inclined side wall which takes a position limited between 0.2L to 0.3L from the edge of the triangle enclosure).
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
al-Hattab, Tahsin Ali Husayn& al-Saigh, Ali Safa Nuri& al-Innawi, Faruq Hasan Ali. 2011. Natural convection in equilateral triangular enclosure for three situations with heating element applied at different positions on the inclined side wall. The Iraqi Journal for Mechanical and Materials Engineering،Vol. 11, no. 4, pp.619-636.
https://search.emarefa.net/detail/BIM-321121
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
al-Hattab, Tahsin Ali Husayn…[et al.]. Natural convection in equilateral triangular enclosure for three situations with heating element applied at different positions on the inclined side wall. The Iraqi Journal for Mechanical and Materials Engineering Vol. 11, no. 4 (2011), pp.619-636.
https://search.emarefa.net/detail/BIM-321121
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
al-Hattab, Tahsin Ali Husayn& al-Saigh, Ali Safa Nuri& al-Innawi, Faruq Hasan Ali. Natural convection in equilateral triangular enclosure for three situations with heating element applied at different positions on the inclined side wall. The Iraqi Journal for Mechanical and Materials Engineering. 2011. Vol. 11, no. 4, pp.619-636.
https://search.emarefa.net/detail/BIM-321121
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes appendix : p. 636
رقم السجل
BIM-321121
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر