Estimation of Compositions of Zr-Cu Binary Sputtered Film and Its Characterization
المؤلفون المشاركون
Umeda, Junko
Kondoh, Katsuyoshi
Fujita, Junji
Serikawa, Tadashi
المصدر
Advances in Materials Science and Engineering
العدد
المجلد 2008، العدد 2008 (31 ديسمبر/كانون الأول 2008)، ص ص. 1-5، 5ص.
الناشر
Hindawi Publishing Corporation
تاريخ النشر
2009-01-14
دولة النشر
مصر
عدد الصفحات
5
التخصصات الرئيسية
العلوم الهندسية و تكنولوجيا المعلومات
الملخص EN
Zr-Cu amorphous films were prepared by radio-frequency (RF) magnetron sputtering on glass substrate using two kinds of the elemental composite targets: Cu chips on Zr plate and Zr chips on Cu plate.
It was easy to precisely control chemical compositions of sputtered films by selecting the chip metal and the number of chips.
It is possible to accurately estimate the film compositions by using the sputtered area and the deposition rate of Cu and Zr.
XRD analysis on every as-sputtered film showed the broadened pattern.
Zr-rich composition film, however, revealed a small peak at the diffraction angle of 2θ=35∘, and Cu-rich one indicated it at 2θ=43∘.
TEM and electron diffraction analysis on the former also showed the main Zr ring patterns and its streaks.
Zr-rich composition film with Cu content of 34 at% or less indicated a good corrosion resistance by salt spray test.
On the other hand, Cu-rich version with 74 at% Cu or more was poor in corrosion resistance.
This was because Zr was reactively passive, and caused the spontaneous formation of a hard non-reactive surface film that inhibited further corrosion than Cu.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Kondoh, Katsuyoshi& Fujita, Junji& Umeda, Junko& Serikawa, Tadashi. 2009. Estimation of Compositions of Zr-Cu Binary Sputtered Film and Its Characterization. Advances in Materials Science and Engineering،Vol. 2008, no. 2008, pp.1-5.
https://search.emarefa.net/detail/BIM-478070
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Kondoh, Katsuyoshi…[et al.]. Estimation of Compositions of Zr-Cu Binary Sputtered Film and Its Characterization. Advances in Materials Science and Engineering No. 2008 (2008), pp.1-5.
https://search.emarefa.net/detail/BIM-478070
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Kondoh, Katsuyoshi& Fujita, Junji& Umeda, Junko& Serikawa, Tadashi. Estimation of Compositions of Zr-Cu Binary Sputtered Film and Its Characterization. Advances in Materials Science and Engineering. 2009. Vol. 2008, no. 2008, pp.1-5.
https://search.emarefa.net/detail/BIM-478070
نوع البيانات
مقالات
لغة النص
الإنجليزية
الملاحظات
Includes bibliographical references
رقم السجل
BIM-478070
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر