Investigation of optical injection locking model
العناوين الأخرى
تحقيق نموذج قفل الحقن البصرية
مقدم أطروحة جامعية
Tanin, Abd al-Salam Mansur Ahmad
مشرف أطروحة جامعية
الجامعة
جامعة مؤتة
الكلية
كلية الهندسة
القسم الأكاديمي
قسم الهندسة الكهربائية
دولة الجامعة
الأردن
الدرجة العلمية
ماجستير
تاريخ الدرجة العلمية
2017
الملخص العربي
تتناول هذه الأطروحة طريقة الحقن البصرية كمسار لتقليل تكلفة، حجم، وتعقيد نظام اتصالات الألياف الضوئية.
عادة ما تستخدم معادلات اشباه الموصلات كنموذج أساسي لوصف التفاعل الذي يحدث بين الفوتونات وناقلات الشحنة داخل تجويف الليزر.
عندما يتم حقن مصدر ضوء إضافي داخل التجويف، يحافظ النظام على الشكل العام للمعادلات الأساسية.
حيث من خلال تطبيق قفل الحقن البصرية (OIL) لأشباه الموصلات يدعم تطبيقات مفيدة للغاية التي لا يمكن تحقيقها من خلال استخدام ليزرات اشابه الموصلات الحرة.
في هذه الأطروحة تم تحقيق وتقديم قفل الحقن البصري لليزرات أشباه الموصلات من عدة جوانب مختلفة.
حيث تم محاكاة وتحليل الأستقرارية ونطاق القفل لأشباه الموصلات تحت قفل الحقن البصرية.
وتم دراسة وتحليل تأثير كل من عمل تحسن عرض الخط وكذلك معدل الاقتران على معادلات الليزر تحت تأمين الحقن البصري.
وتم تحسين استجابة التردد لليزر إقفال الحقن إضافة الى ذلك، تم عرض ومناقشة استجابة التردد مقابل قيم مختلفة لإعادة توليف الطول الموجي مع تثبيت قيمة نسبة الحقن.
كما تم محاكاة وتحليل الأطياف الضوئية عند قيم مختلفة لإعادة توليف الطول الموجي.
وأخيرا، تم عرض وتحليل استجابة التردد مقابل نسب حقن مختلفة.
مع تثبيت قيمة إعادة توليف الطول الموجي.
ومن خلال التحليل والتحقيق والمحاكاة لكل مما سبق وُجد هناك العديد من الفوائد ل قفل الحقن البصرية على سبيل المثال، تحسين استجابة التردد، زيادة معدل البيانات عرض نطاق عالي، انخفاض تشويه الإشارة، وانخفاض الفقد.
الملخص الإنجليزي
Optical injection locking can be used as a path to minimize cost, complexity, and size of fiber-optic communications.
A rate equations of semiconductor laser based model is usually used to describe the interaction between photons and carriers inside a laser cavity.
When an additional light source is injected into the cavity, the system preserves the general form of the original equations.
Optical injection locking for semiconductor lasers provides beneficial applications not achievable through the free-running lasers and offers preferable performance over free-running lasers.
In this thesis, investigation of optical injection locking for semiconductor lasers are presented and analyzed in various aspects.
Locking range and stability of semiconductor lasers under optical injection locking are simulated and analyzed.
The effects of both the linewidth enhancement factor and coupling rate on the rate equations of laser under injection locking are investigated and analyzed.
The small signal frequency response of injection-locked lasers is analyzed.
Moreover, frequency response versus different wavelength detuning at fixed injection ratio is presented and discussed, and optical spectra is simulated and analyzed at four detuning conditions.
Finally, frequency response versus different injection ratios, for fixed detuning wavelength, is introduced and analyzed.
It's found that there are many benefits of optical injection locking from than the free running of semiconductor laser such as enhancement the frequency response, large modulation bandwidth, high data rate, low signal distortion, and low link loss.
التخصصات الرئيسية
عدد الصفحات
50
قائمة المحتويات
Table of contents.
Abstract.
Abstract in Arabic.
Chapter One : Introduction.
Chapter Two : Injection locking theory : model and analysis.
Chapter Three : Results and discussions.
Chapter Four : Conclusion and future work.
References.
نمط استشهاد جمعية علماء النفس الأمريكية (APA)
Tanin, Abd al-Salam Mansur Ahmad. (2017). Investigation of optical injection locking model. (Master's theses Theses and Dissertations Master). Mutah University, Jordan
https://search.emarefa.net/detail/BIM-780422
نمط استشهاد الجمعية الأمريكية للغات الحديثة (MLA)
Tanin, Abd al-Salam Mansur Ahmad. Investigation of optical injection locking model. (Master's theses Theses and Dissertations Master). Mutah University. (2017).
https://search.emarefa.net/detail/BIM-780422
نمط استشهاد الجمعية الطبية الأمريكية (AMA)
Tanin, Abd al-Salam Mansur Ahmad. (2017). Investigation of optical injection locking model. (Master's theses Theses and Dissertations Master). Mutah University, Jordan
https://search.emarefa.net/detail/BIM-780422
لغة النص
الإنجليزية
نوع البيانات
رسائل جامعية
رقم السجل
BIM-780422
قاعدة معامل التأثير والاستشهادات المرجعية العربي "ارسيف Arcif"
أضخم قاعدة بيانات عربية للاستشهادات المرجعية للمجلات العلمية المحكمة الصادرة في العالم العربي
تقوم هذه الخدمة بالتحقق من التشابه أو الانتحال في الأبحاث والمقالات العلمية والأطروحات الجامعية والكتب والأبحاث باللغة العربية، وتحديد درجة التشابه أو أصالة الأعمال البحثية وحماية ملكيتها الفكرية. تعرف اكثر