Method for Improving Indoor Positioning Accuracy Using Extended Kalman Filter

Abstract EN

Beacons using bluetooth low-energy (BLE) technology have emerged as a new paradigm of indoor positioning service (IPS) because of their advantages such as low power consumption, miniaturization, wide signal range, and low cost.

However, the beacon performance is poor in terms of the indoor positioning accuracy because of noise, motion, and fading, all of which are characteristics of a bluetooth signal and depend on the installation location.

Therefore, it is necessary to improve the accuracy of beacon-based indoor positioning technology by fusing it with existing indoor positioning technology, which uses Wi-Fi, ZigBee, and so forth.

This study proposes a beacon-based indoor positioning method using an extended Kalman filter that recursively processes input data including noise.

After defining the movement of a smartphone on a flat two-dimensional surface, it was assumed that the beacon signal is nonlinear.

Then, the standard deviation and properties of the beacon signal were analyzed.

According to the analysis results, an extended Kalman filter was designed and the accuracy of the smartphone’s indoor position was analyzed through simulations and tests.

The proposed technique achieved good indoor positioning accuracy, with errors of 0.26 m and 0.28 m from the average x - and y -coordinates, respectively, based solely on the beacon signal.