FPGA-Based Software Implementation of Series Harmonic Compensation for Single Phase Inverters

Abstract EN

This paper presents a single chip FPGA (Altera Cyclone II) controlled single phase inverter, programmed for the reduction of harmonics in the output voltage.

Separate composite digital observers have been designed for extracting the fundamental and harmonic components of the voltage and the highly distorted current signals, particularly when the inverter supplies nonlinear loads.

These observers have been embedded into the FPGA along with the controllers and I/O interfaces.

The multiple observers yield very pure in-phase and quadrature voltage signals for use in the outer loop and similar signals for stabilizing the inner current loop.

The Inverter could be modeled as a feed back control system with the fundamental component of the voltage as the desired output while the voltage harmonics take the role of noise creeping into the output.

To obtain a very low total harmonic distortion in the voltage waveform, the well-known control strategy of using a very large feed back around the noise signal has been employed.