Search Results

(1 - 50 of 171)

Journal Articles

Cost-effective and eco-friendly extraction of alumina based on kaolin ore using thermo-chemically activated lime-sinter process

By: al-Dib, Amr Basyuni; Brichkin, Vyacheslav Nikolayevich; Salman, Salah Abd al-Ghani…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.736-750, 15 p.

Subjects: Limestone; Chemical activation; Choline; Heat treatment

Journal Articles

Mechanistic calculation of load equivalency and truck factors for fatigue damage of hot mix asphalt using strain area method

By: Hasan, Salamah; Shihatah, Ahmad; al-Jundi, Muhammad A.. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.751-763, 13 p.

Subjects: Asphalt; Pavements; Loads (Mechanics); Mechanical properties; Trucks

Journal Articles

Free vibration of high rise buildings using condensation of matrices

By: Qasim, Ayah Ashraf; Yusuf, Ahmad Mahmud; Abu al-Sad, Muhammad Najib. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.764-785, 22 p.

Subjects: Lateral loads; Skyscrapers; Structural dynamics; Vibrations; Matrices

Journal Articles

Nonlinear analysis of the gusset plate connection for braced frames subjected to monotonic and cyclic loading

By: Abd al-Wahhab, Muhammad Baha al-Din; Muhammad, Ahmad Jalal; Salim, Imad Said. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.786-804, 19 p.

Subjects: Composite plates; Earthquakes; Structural design; Structural loads

Journal Articles

Study the effect of local metakaolin on the behavior of reinforced concrete slab experimentally and numerically

By: Mahmud, Jamal Sami; Abu Samrah, Ayman Ahmad; Hudhayfah, Wail Fathi. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.805-829, 25 p.

Subjects: Concrete slabs; Reinforced concrete; Mechanical properties

Journal Articles

Experimental investigation on the dynamic characteristics of a spar-type offshore wind turbine under irregular waves

By: Kamal, Ahmad Yusuf; Abu Rayyan, Ashraf Muhammad; Shalabi, Amal…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.830-849, 20 p.

Subjects: Wind power; Wind turbines; Wave power

Journal Articles

Assessing flood risks in arid zones by linking remote sensing techniques and gis

By: Ahmad, Mahir Ali. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.850-868, 19 p.

Subjects: Arid zones; Floods; Geographical information systems; Remote sensing; Egypt

Journal Articles

Multi-class intrusion detection system using deep learning

By: Muhammad, Sarah Mahrus; Muhammad, Ali Rahim. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.869-883, 15 p.

Subjects: Computer security; Deep learning; Intrusion detection systems (Computer security); Web applications

Journal Articles

A metaheuristic to solve the capacitated clustering problem

By: Al Tuyim, Banan Nasir. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.884-899, 16 p.

Subjects: Heuristic algorithms; Artificial bee colony algorithm; Collocation methods

Journal Articles

Semantic segmentation of educational videos for micro learning objects in adaptive e-learning

By: Halawah, Abd al-Rahman Samir; Jamal al-Din, Shihab; Nasr, Abd al-Rahman Ali. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.900-913, 14 p.

Subjects: Digital video; Electronic education; Computational linguistics

Journal Articles

Building an effective recommendation model for students' academic pathways using machine learning

By: Abd al-Maqsud, Ala Mahmud; Jamal al-Din, Shihab Ahmad; Muhammad, Ali Rahim. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.939-950, 12 p.

Subjects: Higher education; Machine learning; Data mining; Egypt; Students

Journal Articles

Thermo-hydraulic characteristics study of the flat plat-finned heat sink

By: Ibrahim, Abd Allah Said; Ahmad, Sayyid; al-Rifai, Muhammad al-Faysal…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.951-972, 22 p.

Subjects: Thermal properties; Heat sinks; Hydraulics

Journal Articles

Influence of actuator morphology on grasping performance of soft robotic grippers in agriculture: simulation study

By: al-Samamti, Mahmud; Hafiz, Nurhan; Abd Rabbih, Sabir…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.973-985, 13 p.

Subjects: Robots; Agriculture; Morphology

Journal Articles

Integrating creative architecture and mathematical genius in designing identity-boosting buildings: a case study of designing a mosque in the al-Obour city

By: Hasan, Mahmud Muhammad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.986-997, 12 p.

Subjects: Architectural engineering; Cultural identity; Egypt; Architectural design; Mathematics

Journal Articles

The potential of multispectral lidar for building extraction in a complex urban area using canupo algorithm

By: Manduh, Asma A.; Ali, Mahmud al-Nuqrashi Uthman; Taha, Lamya Jamal al-Din…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.998-1008, 11 p.

Subjects: Remote sensing; Urban areas; Buildings

Journal Articles

Evaluating flow 3D's accuracy in predicting hydraulic characteristics of circular spillways

By: Mubashir, Amir Muhammad; Dardeer, Mamduh Ahmad; Mahmud, Ahmad Hilmi…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.515-528, 14 p.

Subjects: Floods; Hydraulic structures; Dams

Journal Articles

Influence of water content on the shear strength parameters for cohesive soil

By: Abd al-Munim, Hadir hamdi; al-Sadiq, Mahmud Abu Bakr; Sad al-Din, Muhammad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.529-540, 12 p.

Subjects: Clay soils; Egypt; Nile River Delta; Shear strength; Water

Journal Articles

Enhancement positioning performance using modified precise point positioning (PPP)‎ software

By: abd al-fattah, Shayma Faruq; Ali, Mahmud al-Nuqrashi; Ahmad, Ahmad Abd al-Hayy…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.541-554, 14 p.

Subjects: Global Positioning Systems; Application software; Signal processing

Journal Articles

Effect of drainage states on consolidation of cohesive soil within plasticity range

By: Ahmad, Najwa Sad; al-Sadiq, Mahmud Abu Bakr; Sad al-Din, Muhammad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.555-565, 11 p.

Subjects: Soils; Drainage; Egypt; Microhardness; Plasticity

Journal Articles

Automatic translation of Arabic text to Arabic sign language using deep learning

By: Jamal al-Din, Shihab; Muhammad, Ali Rahim; al-Nabawi, Muhammad Atif…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.566-579, 14 p.

Subjects: Arabic language; Automatic translation; Sign language; Deep learning

Journal Articles

Waste management as a tool to preserve the Sensetive ecosystem of the al-Baha region in Saudi Arabia

By: Hammad, Mahmud Tariq Muhammad; al-Dusari, Nayif Ali Rashid; al-Zahrani, Abd al-Aziz Bin Ali…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.580-607, 28 p.

Subjects: Bahah; Saudi Arabia; Waste treatment; Ecological balance; Recycling

Journal Articles

The potential of implementing superblocks in Nasr city

By: Abd al-Baqi, Tariq Muhammad Tariq Fuad; Abduh, Amal Ahmad; Mursi, Ahmad Abd al-Ghani. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.608-623, 16 p.

Subjects: Egypt; Quality of life; Urban areas; Urban planning

Journal Articles

The effect of visual perception on a spatial sequence in the aquarium museum

By: Ahmad, Muhammad sayf al-Nasr. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.624-640, 17 p.

Subjects: Museums; Visual perception; Aquatic organisms; Architectural design

Journal Articles

Evaluating flow 3D's accuracy in predicting hydraulic characteristics of circular spillways

By: Mubashir, Amir Muhammad; Dardeer, Mamduh Ahmad; Mahmud, Ahmad Hilmi…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.515-528, 14 p.

Subjects: Flood control; Hydraulic structures; Dams; Drainage

Journal Articles

Impacts of architectural design on quality of life and society

By: al-Harbi, Mishil abd al-Aziz. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.641-650, 10 p.

Subjects: Architectural design; Quality of life; Architecture; Society

Journal Articles

Meta-analysis of factors affecting time overrun of healthcare facilities in Egypt

By: Jirah, Muna; Khudayr, Layla M.; al-abd, Noran. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.651-669, 19 p.

Subjects: Construction projects; Egypt; Medical care

Journal Articles

Effect of Metakaolin activation and alccofine on the mechanical strength of concrete at elevated temperature

By: Abd al-Aziz, Yasamin Hifni. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.338-359, 22 p.

Subjects: Chemical activation; High temperatures; Concrete; Glass fibers; Mechanical properties

Journal Articles

Optimum spacing and member groups recommendations for a transmission line system

By: Awadayn, Muhammad Hani; Ghalib, Ahmad Amin; Abu al-Sad, Muhammad Najib. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.360-370, 11 p.

Subjects: Energy transfer; Pressure; Towers; Electric power; Structural design

Journal Articles

Impact of addition of macro fibers on the mechanical properties of concrete

By: Badawi, Muhammad Mahmud; Anan, Azzah Ibrahim. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.371-385, 15 p.

Subjects: Concrete; Glass fibers; Mechanical properties; Polypropylene fibers

Journal Articles

Improved accuracy of elevations obtained from RTK and kinematic data and its impact in calculating earthworks

By: Shahin, Baha Ali. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.386-395, 10 p.

Subjects: Artificial satellites; Global Positioning Systems; Monitoring

Journal Articles

3D data registration evaluation of indoor laser scanner based on various techniques

By: Sab, Nasr al-Muhammadi; Abd al-Aziz, Khalid Mahmud. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.396-412, 17 p.

Subjects: Three-dimensional modeling; Construction; Lasers; Scanning systems

Journal Articles

Development the dataset for automatic translation system

By: Ghanim, Dahi Jabir. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.413-422, 10 p.

Subjects: Arabic language; Automatic translation; German language; Proofreading; Word processing

Journal Articles

Automatic translation system against deep neural automatic translation system

By: Ghanim, Dahi Jabir. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.423-429, 7 p.

Subjects: Arabic language; Automatic translation; Neural networks (Computer science); German language

Journal Articles

Weighting the assessment categories of Egypt's green hospitals rating system using analytical hierarchy process

By: al-Ariani, Sarah Abd al-Munim; Salim, Dina. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.430-442, 13 p.

Subjects: Egypt; Hospitals; Sustainable buildings; Architectural design; Hierarchical clustering (Cluster analysis)

Journal Articles

Studying the effect of different types and dimensions of materials for vertical reflective surfaces on multipath of GPS signal

By: Muhammad, Mustafa Hasan Abd al-Sattar. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.1-17, 17 p.

Subjects: Convex surfaces; Global Positioning Systems; Signal processing

Journal Articles

Experimental study on the addition offine glass to concrete

By: Muhammad, Abduh Khalaf; Ibrahim, Zakariyya Hamid Awad Allah; Muhammad, Umar Hamdi. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.18-40, 23 p.

Subjects: Concrete; Mechanical properties; Glass

Journal Articles

Water resources potentiality for sustainable agriculture development in south Sinai

By: Abd al-Qadir, Muhammad Mukhtar; Mubashir, Amir Muhammad; Rida, Muhammad Ahmad…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.41-56, 16 p.

Subjects: Agricultural development; Egypt; Sustainable agriculture; Water resources; South Sinai

Journal Articles

Origin destination matrix estimation based on traffic counts using fmincon function in matlab

By: Sifin, Gurjit; Ahmad, Khalil; Ramadan, Ibrahim. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.57-73, 17 p.

Subjects: MATLAB; Matrices; Traffic

Journal Articles

Toward sustainable transportation in developing areas

By: Mahfuz, Abd al-Rahman Baz Abd al-Sami; Idris, Ahmad Uthman. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.74-82, 9 p.

Subjects: Carbon dioxide; Egypt; Urban transport; Zaqaziq; Sustainability

Journal Articles

Power quality improvement considering voltage sag and unbalance using DVR

By: Matar, al-Zahra Mahmud Muhammad; Mahmud, Ikram Sad; al-Sayyid, Muhammad Ibrahim. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.83-97, 15 p.

Subjects: Electric power; Induction motors; Egypt; Low voltage systems

Journal Articles

Energy management in smart inter-connected micro-grids using a hybrid sperm swarm optimization and gravitational: search algorithm

By: Abd al-Fattah, Fayiz Kamel; Muhanna, Muhammad Ahmad Ahmad; al-Jazzar, Muhammad Muhammad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.97-115, 19 p.

Subjects: Electric networks; Electric power; Gravity; Sperm; Algorithms

Journal Articles

Dynamic performance optimization of shunt active power filter to eliminate total harmonic distortion

By: Muhammad, Abd al-Muizz Ahmad Id; Sulayman, Ahmad Muhammad Atiyyah; Muhanna, Muhammad Ahmad Ahmad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.116-128, 13 p.

Subjects: Electric filters; Dynamics; Electric power; Harmonic analysis

Journal Articles

A systematic survey on examinees identity authentication in online distant exams

By: Salih, Jihan; Tharwat, Jamal; Jamal al-Din, Shihab. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.129-151, 23 p.

Subjects: Authentication; Distance education; Examinations

Journal Articles

Enhancing the performance of natural ventilation by the effect of spatial configurations in hot-arid climate

By: Salim, Duaa Muhammad; Fajjal, Ahmad Atif al-Dasuqi; Mustafa, Abir Muhammad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.152-168, 17 p.

Subjects: Arid zones; Egypt; Natural ventilation; Architectural design; High temperatures

Journal Articles

Changing order during the implementation phase of projects under national and international construction contracts

By: Muhammadi, Nurhan Hazim; Faruq, Akram; Abd al-Fattah, Mutazz. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.169-182, 14 p.

Subjects: Construction projects; Contracts; Egypt; Law; Project implementation

Journal Articles

Retrofitting shading units to optimize daylighting in the governmental school building in Cairo

By: Rakha, Wala Mahmud; Nasim, Ashraf Ali Ibrahim; Ismail, Mustafa Rafat. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.183-202, 20 p.

Subjects: School Buildings; Architectural design; Cairo; Daylight; Egypt

Journal Articles

Studying the impact of the role of Nanomaterials technology in developing the performance of buildings and their effect on the architectural formation

By: Mahmud, Ahmad Hanafi. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.203-217, 15 p.

Subjects: Architectural design; Nanomaterials; Nanotechnology; Buildings

Journal Articles

The use of nano-glass in passive fire safety in buildings

By: Jawdat, Sarah; Faruq, Akram; Farid, Ayman. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.218-225, 8 p.

Subjects: Architectural design; Buildings; Fire protection; Nanotechnology; Glass

Journal Articles

The study of changing the colors of buildings in hot environments to reduce the effect of (UHI)‎

By: el Ashmawy, Ahmed A.; Faruq, Ghadah; al-Shatir, Abir…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.226-236, 11 p.

Subjects: Global warming; Open spaces; Urban areas; Buildings; Urban planning

Journal Articles

Critical success factors by applying total quality management in construction projects

By: al-shirbini, Sharif Awad Muhammad; Jad, Samir Abd al-Fattah Abd al-Munim; Abd al-Alim, Ahmad Muhammad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 66 (Jan. 2023), pp.237-258, 22 p.

Subjects: Construction projects; Egypt; Saudi Arabia; Success; Total quality management

Journal Articles
Book
Book chapters
Journals
International Theses
Arab Theses
Conference Papers
Book Reviews
Statistical Reports
Annual Reports
Conference
Thesaurus
Academic Programs
Awards
Concepts and Terminology
Institute
Poll Question
Fatawa
Training Courses
Public Opinion Polls
Resolutions
Person
Governance
Articles of association
Auditing Reports
Laws
Corporate Report
Monographic Series
Quarterly Reports
Conference Review
Textbook
Textbook Chapter

2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
1988
1987
1986
1985
1984
1983
1982
1981
1980
1979
1978
1977
1976
1975
1974
1973
1972
1971
1970
1969
1968
1967
1966
1965
1964
1963
1962
1961
1960

2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
2007
2006
2005
2004
2003
2002
2001
2000
1999
1998
1997
1996
1995
1994
1993
1992
1991
1990
1989
1988
1987
1986
1985
1984
1983
1982
1981
1980
1979
1978
1977
1976
1975
1974
1973
1972
1971
1970
1969
1968
1967
1966
1965
1964
1963
1962
1961
1960

Advanced Search

Search Controls

Article Limiters

Main Subjects

Data Type

Language

Country

Authors / Persons

Source

Institute

Topics

Search Results

Cost-effective and eco-friendly extraction of alumina based on kaolin ore using thermo-chemically activated lime-sinter process

By: al-Dib, Amr Basyuni; Brichkin, Vyacheslav Nikolayevich; Salman, Salah Abd al-Ghani…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.736-750, 15 p.

Mechanistic calculation of load equivalency and truck factors for fatigue damage of hot mix asphalt using strain area method

By: Hasan, Salamah; Shihatah, Ahmad; al-Jundi, Muhammad A.. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.751-763, 13 p.

Free vibration of high rise buildings using condensation of matrices

By: Qasim, Ayah Ashraf; Yusuf, Ahmad Mahmud; Abu al-Sad, Muhammad Najib. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.764-785, 22 p.

Nonlinear analysis of the gusset plate connection for braced frames subjected to monotonic and cyclic loading

By: Abd al-Wahhab, Muhammad Baha al-Din; Muhammad, Ahmad Jalal; Salim, Imad Said. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.786-804, 19 p.

Study the effect of local metakaolin on the behavior of reinforced concrete slab experimentally and numerically

By: Mahmud, Jamal Sami; Abu Samrah, Ayman Ahmad; Hudhayfah, Wail Fathi. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.805-829, 25 p.

Experimental investigation on the dynamic characteristics of a spar-type offshore wind turbine under irregular waves

By: Kamal, Ahmad Yusuf; Abu Rayyan, Ashraf Muhammad; Shalabi, Amal…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.830-849, 20 p.

Assessing flood risks in arid zones by linking remote sensing techniques and gis

By: Ahmad, Mahir Ali. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.850-868, 19 p.

Multi-class intrusion detection system using deep learning

By: Muhammad, Sarah Mahrus; Muhammad, Ali Rahim. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.869-883, 15 p.

A metaheuristic to solve the capacitated clustering problem

By: Al Tuyim, Banan Nasir. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.884-899, 16 p.

Semantic segmentation of educational videos for micro learning objects in adaptive e-learning

By: Halawah, Abd al-Rahman Samir; Jamal al-Din, Shihab; Nasr, Abd al-Rahman Ali. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.900-913, 14 p.

Building an effective recommendation model for students' academic pathways using machine learning

By: Abd al-Maqsud, Ala Mahmud; Jamal al-Din, Shihab Ahmad; Muhammad, Ali Rahim. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.939-950, 12 p.

Thermo-hydraulic characteristics study of the flat plat-finned heat sink

By: Ibrahim, Abd Allah Said; Ahmad, Sayyid; al-Rifai, Muhammad al-Faysal…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.951-972, 22 p.

Influence of actuator morphology on grasping performance of soft robotic grippers in agriculture: simulation study

By: al-Samamti, Mahmud; Hafiz, Nurhan; Abd Rabbih, Sabir…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.973-985, 13 p.

Integrating creative architecture and mathematical genius in designing identity-boosting buildings: a case study of designing a mosque in the al-Obour city

By: Hasan, Mahmud Muhammad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.986-997, 12 p.

The potential of multispectral lidar for building extraction in a complex urban area using canupo algorithm

By: Manduh, Asma A.; Ali, Mahmud al-Nuqrashi Uthman; Taha, Lamya Jamal al-Din…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 69 (Oct. 2023), pp.998-1008, 11 p.

Evaluating flow 3D's accuracy in predicting hydraulic characteristics of circular spillways

By: Mubashir, Amir Muhammad; Dardeer, Mamduh Ahmad; Mahmud, Ahmad Hilmi…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.515-528, 14 p.

Influence of water content on the shear strength parameters for cohesive soil

By: Abd al-Munim, Hadir hamdi; al-Sadiq, Mahmud Abu Bakr; Sad al-Din, Muhammad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.529-540, 12 p.

Enhancement positioning performance using modified precise point positioning (PPP)‎ software

By: abd al-fattah, Shayma Faruq; Ali, Mahmud al-Nuqrashi; Ahmad, Ahmad Abd al-Hayy…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.541-554, 14 p.

Effect of drainage states on consolidation of cohesive soil within plasticity range

By: Ahmad, Najwa Sad; al-Sadiq, Mahmud Abu Bakr; Sad al-Din, Muhammad. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.555-565, 11 p.

Automatic translation of Arabic text to Arabic sign language using deep learning

By: Jamal al-Din, Shihab; Muhammad, Ali Rahim; al-Nabawi, Muhammad Atif…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.566-579, 14 p.

Waste management as a tool to preserve the Sensetive ecosystem of the al-Baha region in Saudi Arabia

By: Hammad, Mahmud Tariq Muhammad; al-Dusari, Nayif Ali Rashid; al-Zahrani, Abd al-Aziz Bin Ali…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.580-607, 28 p.

The potential of implementing superblocks in Nasr city

By: Abd al-Baqi, Tariq Muhammad Tariq Fuad; Abduh, Amal Ahmad; Mursi, Ahmad Abd al-Ghani. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.608-623, 16 p.

The effect of visual perception on a spatial sequence in the aquarium museum

By: Ahmad, Muhammad sayf al-Nasr. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.624-640, 17 p.

Evaluating flow 3D's accuracy in predicting hydraulic characteristics of circular spillways

By: Mubashir, Amir Muhammad; Dardeer, Mamduh Ahmad; Mahmud, Ahmad Hilmi…[et al.]. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.515-528, 14 p.

Impacts of architectural design on quality of life and society

By: al-Harbi, Mishil abd al-Aziz. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.641-650, 10 p.

Meta-analysis of factors affecting time overrun of healthcare facilities in Egypt

By: Jirah, Muna; Khudayr, Layla M.; al-abd, Noran. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 68 (Jul. 2023), pp.651-669, 19 p.

Effect of Metakaolin activation and alccofine on the mechanical strength of concrete at elevated temperature

By: Abd al-Aziz, Yasamin Hifni. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.338-359, 22 p.

Optimum spacing and member groups recommendations for a transmission line system

By: Awadayn, Muhammad Hani; Ghalib, Ahmad Amin; Abu al-Sad, Muhammad Najib. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.360-370, 11 p.

Impact of addition of macro fibers on the mechanical properties of concrete

By: Badawi, Muhammad Mahmud; Anan, Azzah Ibrahim. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.371-385, 15 p.

Improved accuracy of elevations obtained from RTK and kinematic data and its impact in calculating earthworks

By: Shahin, Baha Ali. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.386-395, 10 p.

3D data registration evaluation of indoor laser scanner based on various techniques

By: Sab, Nasr al-Muhammadi; Abd al-Aziz, Khalid Mahmud. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.396-412, 17 p.

Development the dataset for automatic translation system

By: Ghanim, Dahi Jabir. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.413-422, 10 p.

Automatic translation system against deep neural automatic translation system

By: Ghanim, Dahi Jabir. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.423-429, 7 p.

Weighting the assessment categories of Egypt's green hospitals rating system using analytical hierarchy process

By: al-Ariani, Sarah Abd al-Munim; Salim, Dina. Journal of Al-Azhar University Engineering Sector. Vol. 18, no. 67 (Apr. 2023), pp.430-442, 13 p.